Product Description

CURT Receiver Tube Adapters are made to adapt a receiver opening to a different size. Adjust your receiver from 1 ¼” to 2”, 2” to 1 ¼”, or 2 ½” to 2”. Receiver tube adapters work great to tow a cargo carrier, bike rack, or ATV hitch hauler. Gross tow weights (GTW) are available from 3,500 to 8,000 lbs. This high-quality CURT product is finished with a durable powder coat for added rust resistance.

---

Product Details

• Amazon Sales Rank: #26413 in Automotive
• Size: 9 1/2"
• Brand: Curt
• Model: 45775
• Number of items: 1
• Dimensions: 2.00" h x 2.00" w x 14.00" l, 4.00 pounds

Features

• Adapts 2" Receivers to 1-1/4" Receivers
• The working length whhich is the distance between the center of the two pin holes is : 9-1/2"
• 2" Hollow Shank
• 3500 lbs GTW/350 lbs TW
• Durable powder coat finish

---

Customer Reviews

Most helpful customer reviews

13 of 13 people found the following review helpful.
It was perfect for my need.
By Ronald W. Springer
I needed to adapt the 2" hitch on my Jeep Wrangler Sahara Unlimited to a 1-1/4" Yakima bike rack, and the rack had to clear the rear mount spare. The extension of about 4" from pin-hole to pin-hole was perfect - it allows about 1" of clearance from the tire to the vertical rack post.

10 of 10 people found the following review helpful.
get it for less
By Stephen OBrien
You can get a comparable item at U-Haul for $16.00. U-Hauls adapter is top quality. The dimensions are perfect, the fit was just right.

9 of 9 people found the following review helpful.
Poor Quality Control; doesn't fit 2" receiver
By ALF Engineer
This item was exactly what I needed to use my old Thule bike rack with a 1.25" bar in a new 2" receiver. The 1.25" receiver end fits the Thule rack bar; however, the 2" end that enters the vehicle receiver DOESN'T FIT.

The question is...is my new receiver small or this adapter too large? Several other 2" bars, old and new, fit my receiver perfectly so the evidence says the problem lies with this particular part. I used a micrometer and checked my receiver and this adapter. My receiver is exactly 2" square. This adapter is just slightly larger. It appears it may be a combination of the original bar stock being on the large end of its tolerance combined with the thickness of the coating. Although the method used to cut the bar stock appears to have slightly deformed the end that enters the receiver. Perhaps a quality control issue on the metal cutting or over-exuberance on the painted coating?

After seeing another reviewer with the same problem I resis ted my immediate urge of grinding it down and instead returned this reducer.

If your receiver is slightly larger than 2", then this part may be an excellent choice to give you the tight fit that other reviewers commented on. However, if your receiver meets its specs then this part likely won't fit.