Product Description

Brand new 194-5SMD white color LED bulbs by package of 10. Please note these are aftermarket bulbs and the fitment will be similar to a glass wedge bulb, but sometimes slightly off. The base of these bulbs are made from plastic vs glass of OEM bulbs.

---

Product Details

• Amazon Sales Rank: #150 in Automotive
• Color: White
• Brand: AGT - Advanced German Technology
• Model: 10x194-5SMD-W

Features

• 10 x Wedge Type Bulbs by AGT packaged 2 per plastic bag (AGT Brand LED bulbs are known for using superior SMD bulbs that perform and last 2x longer than competitor LED bulbs) Be aware of sellers selling NON-AGT brand bulbs. There are cheaper modules on the market they may substitute.
• Ultra Bright 5SMD-3CHIP 5050 Technology LED. Brighter than your factory bulb or your money back! Please note some lenses may block some of LED light, because it is more directional.
• Produces a crisp 6000K Cool White light that matches a modern feel
• Commonly used inside of vehicles and license plates of most vehicles
• Low Power Consumption; Long-lasting Life up to 100,000 hours

---

Customer Reviews

Most helpful customer reviews

31 of 31 people found the following review helpful.
Great LED's for the price
By Jake P
These LEDs work wonderfully! I give them 4 stars for the following reasons:

Pros:
Bright, "white" color (far brighter than standard bulbs) - Looks like daylight in the car
Excellent price
Lights, when tested, use far less draw (wattage) than factory bulbs
PERFECT for dome/courtesy light replacement! You want a light you can actually read a map with? Go LED
(Not recommended) Left dome/courtesy lights on over night and car started perfectly in the morning. Go LED!

Cons:
Do not fit all "factory" applications (lamp diameter is larger than some bulb housing "holes")
LED's seem to "stay on" though VERY dimly (and with no noticeable power draw...won't kill your battery)
Only really work in clear-lense applications. All other applications (red or amber side markers) gave little difference in light, and the light was generally dimmer than factory on my application (2007 Mustang)...and of course, if you intend to use ANY LED replacement bulb for a flasher/blinker application you will need to install a load resistor. If not, you will likely receive one of the following problems: 1) hyper-flash (flashes EXTREMELY fast) 2) No flash at all (especially newer vehicles) 3) "Lamp Out" indicator on dash (especially in newer vehicles).

I will provide video at a later date.

12 of 12 people found the following review helpful.
Great Set of LED's! Super Bright! (GM Truck Install Notes)
By K. Benson
These things are great! I can't stand the yellow lighting that comes from incandescent bulbs. I was super happy when I saw these available. I did my research and decided to go with these 5-SMD LED bulbs. Let me say, these bulbs are awesome. I love the super bright white light that comes from them. They also have a good all around dispersion of light and does not look like a spot light like some others thanks to the 4 SMD's throwing light to the sides.

Please note that these are a good bit wider at the top than 194 or 168 bulbs, so if you have a small opening you might not be able to fit these. Also, these are too long to fit comfortably inside the license plate lights on GM full size trucks (99-07). They end up hitting the lens and bend a bit (they 'technically' can work but I didn't like how they fit). For that I used the flat 4 SMD LED bulbs that you can find on here and they work perfectly and aren't too bright for that application like these are. All the ma in lighting bulbs can be replaced with these except the dome light, it is a 42mm 211-2 festoon bulb which you can find led replacements for on here.

Install notes for those with GMC or Chevy 99-07 trucks: I ended up changing every bulb I could to these LED's. There are 2 wheel well bulbs, two in the doors and I even changed the one in the glove box as well as the two reading lights. Install was super easy for the wheel well ones, just sockets under the dash, so you don't have to remove anything. To replace the ones in the door, take a flat head screw driver and pry up on the lens on the red side to pop it out. These bulbs where a bit bigger than the opening so I had to carefully pop it in all the way with just the bottom connector itself outside the hole. The glove box was actually the most difficult as it didn't seem to want to pop out. It took quite a bit of patience but eventually was able to pop it out. To replace the reading lights, use a flat head and pop o ff the lens. Then pop out the reflector then the light. To install these since they are wider place the reflector back in and then connect the bulb over the reflector. It is JUST short enough to fit. I also replaced the side turn signal marker (not the main one, the one on the far side of the lens). Pop out the lights and replace.

A bit annoying is the fact that the bulbs I received were NOT AGT branded. They were from a seller fulfilled by Amazon. I think Speed Shop sells the AGT branded ones, packaged 2 to a pack with an AGT sticker on the package. The ones I got were packaged all together in a single anti-static bag with no branding. However, they seem of decent enough quality, were super bright and all worked perfectly to where it wasn't worth returning them. I doubt there is too much of a difference between the two, at least I hope.

These are DEFINITELY brighter than normal 194 or 168 bulbs. I ended up using 9 out of the 10 and am happy to say that they ALL work perfectly. This is a great 'mod' for those that light pure white light and it looks really good at night. Overall I am very happy with my purchase as well as the very decent price they are selling for.

10 of 10 people found the following review helpful.
Mostly work as advertised, but not a great fit for my car
By Jarrod W Massie
I can't speak for everyone since every car's socket for 194/168 bulbs is going to be different, but these bulbs didn't fit very well in my 2007 Honda S2000. I would have to plug the bulb in and wiggle it around a little to get the LED's to come on. Once they came on, they were fantastic. They are much brighter than the factory bulbs. Unfortunately, this is an automobile application, and if the bulbs go in and out from a little vibration, it poses a real problem.